Addressable Panel >> Avani

Features:

  • As per UL 864, 9th Edition & NFPA 72.
  • 32 bit Processor - Arm Cortex M3.
  • 40 x 4 Characters LCD display.
  • Touch Key pad for user friendly operation
  • Maximum 4 number of loop cards with class A or B wiring.
  • Maximum 254 devices (Combination of Devices) per loop.
  • Up to 192 Grouping Facility.
  • Auto Scanning Facility.
  • Device wise Configuration Facility.
  • Auto Device type Verification.
  • Programmable Detector Sensitivity.
  • 2000 Event storage with real time clock
  • Day / Night Mode Facility.
  • USB 2.0 Interface for PC connectivity.
  • Rs 485 Communication Facility for Network / Repeater
  • Auto Dialer / GSM Module (Optional)
  • Ethernet Module (Optional)
  • Printer interface Module (Optional)
  • Programmable Auto silence Facility
  • Programmable Trouble Remainder Facility
  • Programmable AC Loss Delay
  • Programmable Silence inhibit.
  • Loop wise test Facility
  • Operates on 110 to 220 V AC, 60 / 50 Hz.
  • Battery Backup 24V DC with built in charger
  • Battery low visual warning with audible tone
  • Three nos. form C relay for fire, Fault and Supervisory.
  • Supervised 24V DC Output.
  • Two nos. of Supervised notification Appliance circuits.

Technical Specification :

 
Primary Power 
120 - 220VAC + 10% - 15%, 60 / 50 Hz,
Standby Power 
 24v D.C (2 Nos of 12v, 14Ah Sealed Lead acid battery).
Operating Condition 
Operating Temperature 0-49° C/32-120° F.

Relative Humidity 93±2% RH (non-condensing) at 32 ±2° C/96 ±30 F.

Charging Circuit
Charging Voltage 28.4V, ±0.2V Nominal

Charging Current 1.2A (Max.).

Signaling Line Circuits 
Class A or B loop Card: 4 Nos Maximum

Number of Device per loop: Multi protocol for Devices

Number of Device per loop: 254 Devices per Loop

Loop resistance: 40 ohms (Max.).

Loop Capacitance: 06 µf (Max.).

Loop Current: 250mA (Max.).
Initiating Device Circuits 
All zones are Class B Style B/C operation (Programmable).

Normal Operating Voltage : 14-21 VDC.

Alarm Current : 15- 30mA.

Short Circuit Current : 45mA Maximum

Loop resistance : 100 ohms Maximum

End-Of-Line Resistor : 4k7, 1/2watt

Standby Current : 7mA (2mA for Detectors)
Notification Appliance Circuits
Class B Style - Y wiring

Operating Nominal Voltage : 24VDC Nominal

Current for NACs: 1Amps

Line Drop: 2.4V

End-Of-Line Resistor: 4K7, 1/2watt
D.C. Output
Supervised 24VDC, 300mA Max.
3 Common Three Form C Relays
Relay Contact Rating : 2Amps @ 30 VDC. 2Amps @ 3OVAC.

Power Factor : 0.6